All-In-One Hybrid energy system ESS GE-F60 (50KW/60KWh)

21,996.00 

All prices are quoted excluding VAT and do not include delivery costs

The product is available for order in Montenegro, Serbia, Croatia, Slovenia, Germany

20163

19308

Categories: ,

High Voltage All-In-One Hybrid Deye ESS GE-F60 (50KW/60KWh), Price and Specifications

Rated power operation the maximum temperature of the battery is less than 40℃

EMS, hybrid inverter and BMS integrated technology, power supply redundancy design, support black start function, Off-grid operation, etc

Suitable for high-rate cyclic charging and discharging scenarios

Lithium Iron Phosphate (LFP) Battery, The battery pack and system adopt an aerosol fire extinguishing solution

Combustible gas, smoke and temperature detection, system active exhaust, and fire alarm

Supports battery expansion, with a maximum capacity of 360KWh

System, Inverter, Battery Specification

Nominal Output Power / UPS Power (W)50000
AC Output Frequency and Voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac
Grid TypeThree phase
Energy Configuration (kWh)61.4
Dimension (W x D x H, mm)735x1050x2250(no contain inverter)
Weight Appr. (kg)950(battery)+80(inverter)
AC Output Rated Current (A)75.8
Battery Operating Voltage (V)500 ~ 700
Max. charging/discharging efficiency91%
Battery ChemistryLiFePO4
IP Rating of EnclosureIP55
Installation StyleFloor-Mounted
Warranty10 years
Inverter Technical Specification
Max. PV Input Power (W)65000
Max. PV Input Current (A)36+36+36+36
Rated PV Input Voltage (Vdc)600
Peak Power (off-grid)180
MPPT Voltage Range (Vdc)150-850
Max. PV Short-circuit Current (A)55+55+55+55
Number of MPPT4
Peak Power (off grid)1.5 time of rated power, 10s
Power Factor0.8 leading to 0.8 lagging
THD<3%
DC injection current (mA)<0.5%ln
DisplayLCD
Operating Temperature Range (℃)-40~60 ( >45℃ derating)
Relative Humidity15% ~ 85% (No Condensing)
Dimension (W x D x H, mm)527x294x894
Inverter CommunicationCAN, RS485, WIFI, ETH
Safety EMC / StandardIEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, IEC/EN 61000-6-4
Grid RegulationVDE4105, IEC61727 / 62116, VDE0126, AS4777.2, CEI 0 21, EN50549-1, G98, G99, C10-11, UNE217002, NBR16149 / NBR16150
Max. Efficiency97.6%
MPPT Efficiency99.9%
Battery Technical Specification
Battery Module Nominal Voltage (V)51.2
Battery Module Energy (kWh)5.12
BMS CommunicationCAN
Battery Module Dimension (W*D*H mm)440x570x133
Battery Module Weight (kg)44
Operating Temperature RangeCharge: 0~55℃ / Discharge: -20℃~55℃
Cycle Life≥6000 (@25℃±2℃, 0.5C/0.5C, 70%EOL)
Battery Module CertificationCE, IEC62619, IEC62040, UN38.3

Product expansion

MAX: 50kW/360kWh

Расширение емкости All-In-One Hybrid ESSGE-F60 (50KW60KWh)

Product introduction

Основные узлы All-In-One Hybrid ESSGE-F60 (50KW60KWh)
① Air conditionerCooling the ESS system
② Smoke detectorA device used to detect smoke in a fire and sound an alarm when smoke is detected.
③ Heat detectorA device used to measure temperature and sound an alarm if it detects excessive temperature.
④ Travel switchCheck whether the ESS system door is closed.
⑤ InverterA device that converts direct current generated by a battery into alternating current.
⑥ Aerosol fire extinguishing deviceWhen the ESS is detected to be on fire, aerosol is emitted to extinguish the fire.
Main components of the All-In-One Hybrid ESSGE-F60 (50KW60KWh)
① FanEmission of combustible gas
② Combustible gas sensorDetect combustible gases
③ Serial relayControl system
④ Terminal lineFor connecting cables
⑤ Switching Mode Power SupplyPower source
⑥ Temperature and humidity sensorUsed to measure ambient temperature and humidity
⑦ Miniature circuit breakerControlled power-on and power-off
⑧ RelayAutomatic regulation, safety protection, conversion circuit
⑨ Water immersion sensorCheck the ESS for water leakage
⑩ Terminal lineConnect external cables
Main components of the All-In-One Hybrid ESSGE-F60 (50KW60KWh)
① Aerosol fire extinguishing deviceWhen the pack is detected to be on fire, aerosol is emitted to extinguish the fire.
② Battery moduleProvides electrical energy storage and output
③ CCSCells Contact System
④ Air inletCold air inlet
⑤ Battery negative-/
⑥ Battery positive+/
⑦ FanPromote internal and external air flow
⑧ BMUBattery monitoring
Main components of the All-In-One Hybrid ESSGE-F60 (50KW60KWh)
① B-Connection position of the common negative pole of the battery
② B+Connection position of the common positive pole of the battery
③ Air switchUsed to manually control the connection between the battery rack and external devices
④ ALRM light indicatorBattery system fault alarm indicator
⑤ HV light indicatorHigh-voltage hazard indicator
⑥ PCS-Connection position of PCS negative pole
⑦ PCS+Connection position of PCS positive pole
⑧ USBBMS upgrade interface and storage expansion interface
⑨ OUT COMConnection position with next HVB-100A 750V communication output
⑩ IN COMConnection position with previous HVB-100A 750V communication input
⑪ PCS COMCommunication interface with charging and discharging equipment
⑫ STARTA start switch of 12VDC power inside the high-voltage control box
⑬ COMM1Communicative connection with the cabinet
⑭ COMM2Communicative connection with the first battery module; and providing 12VDC power for the first battery module.