Mold in stock

Mold is a microscopic fungus that grows on almost any surface. All that is needed for its appearance is a zone of stagnant air and high humidity. In the process of growth, the mold releases substances toxic to humans and produces many spores that cause severe allergies. Mold in a warehouse harms not only the employees of the enterprise, but also violates the storage conditions of products, worsens their appearance, and leads to damage to raw materials and goods.

Where does the mold come from in the warehouse?

Mold in stock

Modern warehouses use every square centimeter of space. High racks, fully loaded with products, and boxes with goods create obstacles for the free circulation of air. Even well-thought-out ventilation does not always cope with the main task: to completely renew the entire volume of air within an hour. “stagnant” zones are formed.
The situation is aggravated if there is no heating in the warehouse or it is not efficient. In the cold season, the room freezes through, and due to daily temperature changes, condensation forms on the walls. Dampness, insufficient ventilation – the optimal conditions for the development of mold.
Where else does mold come from in a warehouse? The reason may be in insufficient waterproofing: if the room is always high humidity, the fungus begins to grow very quickly. Mold development:

  • violates sanitary and hygienic working conditions;
  • threatens the health of employees;
  • violates the conditions of storage of goods and raw materials;
  • reduces the service life of the object itself, warehouse furniture, equipment stored in the warehouse;
  • leads to damage to the goods and related financial losses.

Therefore, if mold is found in the warehouse, it must be eliminated and prevented from reappearing.

How to get rid of mold in a warehouse?

To combat mold, mechanical and chemical treatments are used. First, the colony is removed using scrapers or other devices, and then the mold growth area is covered with special compounds (often based on caustic chemicals, acids, chlorine). However, if the colony is large or there are several of them, a persistent smell of mold has appeared in the warehouse, such treatment is not enough.

The smell comes from the millions of spores that cover all surfaces, including stored products. As soon as the spores get into favorable conditions, they will begin to grow and develop – a new colony will appear. How to get rid of the smell of mold in the warehouse? It is necessary to treat all surfaces with a disinfectant, but this is an expensive process, especially if the warehouse is large. The second option is rehabilitation (ozonation).

Mold in stock

But it is even more important to create unfavorable conditions for the growth of the fungus in the warehouse: remove excess moisture from the air, eliminate stagnant air zones, and prevent the premises from freezing in winter. And then the question: “How to get rid of mold in a warehouse” will disappear by itself.

For this purpose, electric dehumidifiers are installed at enterprises. They work according to a simple scheme: due to electric heating elements, they heat air masses, which are then distributed throughout the warehouse. This solution allows you to normalize the humidity at the facility, but creates an additional load on the electrical networks, electricity is required to maintain the operation of the equipment, as a result, the cost of maintaining the warehouse increases.

Therefore, interest in solar energy equipment is growing in Russia. It works in much the same way as electric dehumidifiers, but the air is heated by solar energy. The devices are autonomous, do not require connection to power grids and do not consume any other energy carriers (coal, gas, liquid fuel). Thanks to solar-powered equipment, it is possible to maintain normal air humidity in the warehouse without increasing the cost of maintaining it.

Warehouse solar mold protection

To organize the protection of the warehouse from mold using solar equipment, it is enough to install one or more collectors. The number of devices and their power is selected depending on the area of ​​the object. At the same time, the warehouse owner bears financial expenses only once – at the stage of equipment purchase.
Installed devices solve a number of tasks:

  • normalize air humidity;
  • improve ventilation at the facility: eliminate stagnant air zones;
  • warm the room in the cold and prevent it from freezing;
  • prevent the formation of condensation.

This eliminates all factors leading to the growth of the fungus.
Solar-powered equipment is also attractive because it can be installed in non-electrified remote warehouses, it works with the same efficiency all year round and does not require constant human control.
Mold in a warehouse is a big problem. It is much easier to prevent its occurrence than to fight colonies of fungi and eliminate an unpleasant musty smell. This can be done with minimal financial costs using solar-powered equipment.

Share your love